Bekamatic SC pg. 4
hazards and obstacles.
-
Do not try to stop the gate manually once in motion, this can lead to
damage or serious injury.
-
Please note that the gate can generate a considerable force during
operation, which could be a source of danger. Do not move into the
operating area of the gate during motion.
-
Do not allow children to play by opening and closing the gate.
-
Do not allow children to play within the opening area of the gate.
-
Ensure that the wing lock is installed, functioning and locked properly
when the gate wing is closed.
-
When you close the door, take care that the lock is in the open position, to
avoid damage to the counter lock on closing (Risk of breaking the lock).
-
Ensure that the wing is held properly (manual operation) during the
opening or closing of the gate so that uncontrolled movement of the wing
can be excluded.
Reduce speed when reaching the fully open and fully closed positions to
avoid unnecessary wear when coming into contact with the buffers.
-
Under extreme weather conditions (heavy wind), hold the wing securely
during the opening or closing of the gate so that uncontrolled movement of
the wing can be excluded.
-
Persons are not allowed to ride on the wing during operation because of
the following crush hazards:
•
Between the guiding post and the wing as this can cause serious injuries to
arms and legs.
•
Between the guide rollers and catcher as this can cause serious injuries to
hands and fingers.
•
Between the support roller and ramp.
•
Between the wing and the lock post.
•
Between an object at the rear of the wing on opening.
Please adhere to the following to prevent persons from getting caught between
any of these mentioned elements and serious injury.
- Do not climb onto the wing
- Inform all users of these hazards. Ideally this
information should be displayed at a suitable place either on or close to the
gate.
- To guarantee the efficiency of the installation and its correct functioning,
it is imperative that the manufacturers guide lines are observed.
