![background image](http://html1.mh-extra.com/html/betafence/r2000/r2000_installation-manual_2742826021.webp)
21
Robusta SC
4.5.
Positioning of the end post onto the ground anchors:
1)
Remove the lock post from the gate wing and
bring it to his ground anchors. Pull out the
cables from under the lock post and connect
the corresponding (colour-coded) connectors
together. We have provided one or two boxes
with connectors for these connections.
2)
Push the cables back into the tube of the lock post until
the connectors are also in the tube. This will protect them
against water and will facilitate the uninstalling
(replacement) of photocells.
3)
Position the lock post onto the ground anchors and install
the upper washers with nuts. Tighten the nuts slightly for
temporary
fixation.
Summary of Contents for R2000
