![background image](http://html1.mh-extra.com/html/betafence/r2000/r2000_installation-manual_2742826025.webp)
25
Robusta SC
2)
A support roll installed too high will add undesired friction forces
on the wing which are increasing the further the wing is
opened.
3)
The height of the support roll must be
adjusted when the wing is proximately
at 50 cm from completely open
position.
At this position the support roll may
make contact with the underside of
the under beam.
Adjust the height when necessary.
4)
When you have the correctly height. Then tighten we all the M10
nuts for a good fixation of the support roll.
Important remark:
Do not adjust the tensioning system!
Remarks:
It’s very important to fill the space under the plate of the
Guiding and lock post with shrinkage-compensated
Summary of Contents for R2000
