4
Created 11.08.2014:
Approved 11.08.2014:
Bodo Kiesewalter
Otherwise
Check OSE-S unit (Connection box inside the
guiding post) (Status LED must be off) if
status LED is on check the sensors of the
safety edge, if necessary replace the OSE-S
unit.
Warning light does not blink
Check the bulb, if necessary replace it. Lamp
stays always on; replace the board of the
warning light.
IMPORTANT
FC1 and FC2 are “end indicators”: when the gate is half way open, both LED’s will be ON, when
gate is open or close, only one of both will be ON.
4. Manual for to check the safety devices of the sliding gates guiding post / lock
post
Type of safety devices:
4.1
Safety edge
4.2
Photocell
Status LEDs of
the steering
