background image

CONTENT

1. INTRODUCTION......................................................................................................1
2.SPECIFICATION....................................................................................................... 2
3.DIAGRAM..................................................................................................................3
4.BASIC FUNCTION....................................................................................................4
5.RECEIVER CONNECTION AND BINDING METHOD.........................................4

5. 1 Bulit-in Bayang Receiver................................................................................. 5
5. 2 SBUS Protocol................................................................................................. 5
5. 3 DSMX Protocol................................................................................................6

6.OSD MENU................................................................................................................ 6

6.1 How to Enter OSD Menu.................................................................................. 6
6.2 How to Operate OSD Menu.............................................................................. 7
6. 3 How to Tune PID............................................................................................. 7
6.4 How to Change Frequency and Power of VTX................................................ 8
6.5 How to Change the Display Position of OSD Info on Screen...........................9
6.6 How to Set Rate...............................................................................................10

7.ARM & SWITCH FLIGHT MODE......................................................................... 11

7. 1 OSD Illustration............................................................................................. 11
7.2 Armed & Disarm.............................................................................................12
7.3 Flight Mode..................................................................................................... 12
7.4 Features of Different Flight Mode...................................................................14

8.ASSEMBLY GUIDE................................................................................................ 14

8.1 Recommendation.............................................................................................14

9.DEVELOPMENT..................................................................................................... 15

Summary of Contents for Lite brushed V2 FC

















Reviews: