14
Remove the filter cartridge supports (32) from the filter support (Fig.40).
Remove the worn filter cartridge (31) from the filter cartridge support (32) and replace it with the new one (Fig.41). Repeat the operations in reverse order
to reassemble all the parts.
38. Insert the exhaust air filter support (29) in the machine (Fig.42).
39. Rotate the machine to its work position (Fig.43).
40. Lock the handle in the vertical position; to release the handle, move the stop (33) in the direction of the arrow (Fig.44).
41. Rotate the front cover (4) as far as it will go - do this with the aid of the handle (5) (Fig.45).
42. Insert the two tanks and the detergent solution filter cartridge in the machine, positioning first the detergent solution filter cartridge, then the solution tank,
and finally the recovery tank.
43. Rotate the front cover (4) as far as the work position - do this with the aid of the handle (5) (Fig.46).
44. Insert the battery in the battery compartment in the rear part of the machine (Fig.47).
45. Position the machine with its rear part in contact with the floor (Fig.48).
MAINTENANCE
