PROBLEM
CAUSE
POSSIBLE SOLUTION
Cleaning is not even
(a) Pads or scrub brushes are
worn.
(b) Solution is low.
(c) Solution not flowing properly
due to crimp in distribution
hose.
(d) Solution not flowing properly
due to obstruction in
distribution hose.
(e) Brush motor or motors are
not running.
(a) Replace as needed.
(b) Fill solution tank.
(c) Remove crimp from
distribution hose.
(d) Clear obstruction from hose.
(e)
Reset breaker. Check
connections.
(note: if
breakers continue to trip, call
authorized service
personnel.)
Total runtime is low
(a) Battery terminals are dirty.
(b) Water level in batteries is
low.
(c) Batteries are not fully
charged.
(d) Batteries are bad.
(e) Charger is broken.
(a) Clean terminals and
connectors.
(b) Add distilled water to each
battery cell. Do not overfill.
(See instructions in manual.)
(b) Charge batteries.
(c) Replace batteries.
(d) Fix or replace charger.
Scrubber is “dead”. Nothing will
work.
(a) Bad connection involving
batteries.
(b) Dead batteries.
(c) Batteries are bad.
(d) Charger is broken.
(a) Check and clean connections.
(b) Try charging batteries.
(c) Replace batteries.
(d) Fix or replace charger.
The self-propelled traction drive
model will not go forward or
backward.
(a) Traction drive switch was left
on. Speed control powers
down after 20 minutes.
(b) Bad toggle switch in handle.
(c) Circuit breaker is tripped.
(a) Turn switch off and back on.
(b) Replace toggle switch.
(c) Reset circuit breaker.
(note: if
breakers continue to trip, call
authorized service
personnel.)
The self-propelled traction drive
model will go forward, but not
backward; or otherwise does
strange things.
(a) Potentiometer is bad.
(b) Loose connection.
(a) Replace if bad.
(b) Check connections to
switches. Check connections
in connector at speed
control.
Nothing I find here fixes the
problem.
Problem could have several
causes. Everything cannot be
covered here.
Call authorized service
personnel.
TROUBLE-SHOOTING
x
THE TROUBLE-SHOOTING TIPS ARE NOT INTENDED TO TAKE THE PLACE OF
AUTHORIZED SERVICE PERSONNEL.
x
IF YOU ARE UNSURE OF WHAT TO DO—THEN DO NOT DO ANYTHING,
EXCEPT TO CONTACT AUTHORIZED SERVICE PERSONNEL.
x
BEFORE WORKING ON THIS MACHINE, YOU MUST BE FAMILIAR WITH THE
SAFETY INSTRUCTIONS IN THIS MANUAL.
IMPORTANT
Summary of Contents for PowerBuff AS2600T
