13
1. PREPARING TO WORK
A. Connect the battery plug (
1
) to the machine plug
B. Turn the key (
1
) of the main switch to the "ON" position (clockwise). The bat-
tery charge level indicator lights will immediately come on.
C. Turn on the solution control valve (
2
) (solution dispenses automatically while
the brushes are turning).
D. Release the foot lever (
3
) and lower the brush deck. If the floor is particularly
dirty, you can apply additional pressure to the brush deck by raising the foot
lever (
3
) until the lock down is engaged.
E. Lower the squeegee, turning the lever (
4
) counter clockwise. The vacuum
motor will switch on.
F. Check that the brake (
5
) is released.
G. Pulling the switch levers (
1
), activates the brushes and the machine begins to
move forward. During the first few feet, check that the amount of solution is
correct, and that the squeegee dries the floor.
H. The machine will now start to scrub and dry until the solution tank is empty
or recovery tank is full.
OPERATION
