17
4. CLEANING THE SQUEEGEE
For the best fl oor drying performance keep the squeegee clean.
To clean it:
A. Remove the vacuum hose from the squeegee.
B. Loosen the knobs (
1
) that hold the squeegee shoe adapter.
C. Remove and clean the squeegee shoe adapter.
D. Carefully clean inside the squeegee.
E. Carefully clean the squeegee blades.
F. Reassemble all the squeegee components.
5. REMOVING THE PAD
To remove the pad driver:
A. Turn on the machine with the key switch.
B. Press the foot pedal that raises and lowers the brush deck (
1
), and slightly
raise the fl oor pad off the fl oor.
C. Pull the switch levers (
2
) and quickly release them.
D. The pad driver will be automatically release from the brush deck.
6. REPLACING THE SQUEEGEE BLADES
Check the condition of the squeegee blades and, if necessary, replace them.
To replace them:
A. Remove the squeegee vacuum hose from the squeegee shoe adapter.
B. Remove the cotter pins that pass through the mounting pins of the squeegee
shoe.
C. Remove the squeegee shoe from the squeegee yoke.
D. Loosen the knobs two complete turns (
1
).
E. Remove the squeegee band clamp and squeegee blade.
F. Replace the squeegee blades.
To reassemble the squeegee, repeat the above-mentioned operations in the
reverse order.
WARNING: Always wear gloves when doing this operation to pro-
tect yourself from contact with hazardous chemicals.
DAILY MAINTENANCE
Summary of Contents for STEALTH ASD20B
