18
1. CLEANING THE SQUEEGEE HOSE
Every week, or whenever vacuum seems to be unsatisfactory, check the squee-
gee hose for obstructions. To clean it, proceed as follows:
A. Remove the hose from the sleeve on the squeegee.
B. Remove the other end from the recovery tank.
C. Wash the inside of the hose with water introduced from the side where it is
connected to the tank.
D. Reassemble the hose.
WARNING: Always wear gloves when doing this operation to pro-
tect yourself from contact with hazardous chemicals.
2. CHECKING THE BRAKE
Every week, check the distance between the work brake pads and the wheels. If
necessary, adjust them by means of the nuts, so they are at a distance of 0.12 in
(3 mm) when released.
3. CLEANING THE SOLUTION TANK
A. Loosen the solution tank cap.
B. Rinse with water.
C. Loosen the drain cap (
1
) located on the fi lter, and empty the tank.
WARNING: Always wear gloves when doing this operation to pro-
tect yourself from contact with hazardous chemicals.
WEEKLY MAINTENANCE
Summary of Contents for STEALTH ASD20B
