15
1. END OF WORK
When shutting down the machine and before you perform any type of mainte-
nance:
A. Turn off the solution control valve (
1
)
B. Raise the brush deck using the foot pedal (
2
)
C. Raise the squeegee using the squeegee lift lever (
3
)
D. Turn off the key switch (
4
)
E. Move the machine where the tanks can be drained.
F. Remove the drain hose from it's hook, remove the drain cap and empty the
recovery tank.
G. The squeegee must be raised when the machine is not operating, to avoid
deforming the squeegee blades.
H. Disassemble the pads and clean them with water.
WARNING: Always wear gloves when doing this operation to pro-
tect yourself from contact with hazardous chemicals.
SHUTTING DOWN THE MACHINE
Summary of Contents for Stealth ASD20BT
