17
4. CLEANING THE SQUEEGEE
To clean:
A. Remove the vacuum hose from the squeegee shoe adaptor.
B. Loosen the knobs (
1
) at the squeegee shoe adapter.
C. Remove and clean the squeegee shoe adapter.
D. Carefully clean inside the squeegee shoe.
E. Carefully clean the squeegee blades.
F. Reassemble all the squeegee components.
5. MOVING THE PAD DRIVER
To remove the pad driver:
A. Turn on the machine with the key switch.
B. Press the foot pedal that raises and lowers the brush deck, and slightly raise
the pad off the floor (
1
).
C. Pull the switch levers (
2
) then release them immediately.
D. The pad driver will be automatically release from the brush deck.
6. REPLACING THE SQUEEGEE BLADES
Check the wear of the squeegee blades and, if necessary, replace them.
To replace them:
A. Remove the vacuum hose from the squeegee shoe adapter.
B. Remove the cotter pins that mount the squeegee shoe.
C. Remove the squeegee shoe from the squeegee yoke.
D. Loosen the wing nuts (
1
).
E. Remove the squeegee band clamp and squeegee blade.
F. Replace the squeegee blades.
To reassemble the squeegee, repeat the operations in the reverse order.
WARNING: Always wear gloves when doing this operation to pro-
tect yourself from contact with hazardous chemicals.
DAILY MAINTENANCE
Summary of Contents for Stealth ASD20BT
