3
Immediately check, when receiving the machine, that all the materials indicated on delivery documents have been received and
also that the machine has not been damaged in transit. If it has been damaged, this damage must be immediately reported to
the shipper and also to our customer’s service department. Only acting promptly in this manner will make it possible to receive
missing material and to be compensated for damage.
INTRODUCTION
This is an automatic scrubber which, via the mechanical action of
the rotating brush and the chemical action of a water/detergent solu-
tion, can clean many types of hard flooring. As it advances, it also
collects the dirt removed and the detergent solution not absorbed by
the floor.
The machine must be used only for this purpose.
Even the best
machines will only work well if used correctly and kept in good
working order. We therefore suggest you read this instruction book-
let carefully and re-read it whenever difficulties arise while using the
machine. Please contact our technical service department or your
dealers if you have any questions about the machine.
RECEIVING THE MACHINE
Serial # Plate
SYMBOLS USED ON THE MACHINE
Battery charge gauge
Battery symbol
Open book symbol
Used to tell the operator to read the manual before
using the machine
Maximum solution temperature gauge
Located near the solution tank inlet
Summary of Contents for Stealth ASD20BT
