1.0 Important safety information
• The device must be operated with a circuit breaker plug, if fluctuations in the voltage of
over 10% are expected, in order to avoid errors.
• The fuse is 1.5 A at 220 V and 2 A at 110 V. These values may not be exceeded.
• The device must not be operated if the cover is open.
• The device has a time delay of 3 seconds for the renewed activation of the
"ON/OFF"
switch to increase the life of the display.
• Ensure that the sensors and the UV detector cannot be moved.
• The defined paper strength must not be exceeded. Do not insert any objects into the
device.
• Avoid contact with fingers, ties, hair, paperclips or nails to the banknote feed wheel.
• The device must be kept out of reach of children; it may only be operated by adults. Take
care when transporting the device.
• It is not recommended to use the device in high temperatures or direct sunlight.
• Unplug the device if it is not to be used for longer periods.
3
2.0 Description
1) PVC operating field
2) Display for counting display
3) Sensor banknote feed
4) Banknote feed
5) Foldable handle for carrying
6) Display for stacks (10, 20, 25, 50, 100)
7) Top cover
8) Counting sensor
9) Transport wheels
10) Stacking tray
11) Sensor output tray
12) Rubber resistance disc
13) Adjustment of paper strength for banknote feed
14) Mains plug
15) Mains cable
16) Connection for external display (optional)
Fig. 1
Fig. 2
-BJ05_Anleitung engl. 01.11.2006 8:30 Uhr Seite 3
