C.
Insert the middle section into the bottom section (lower middle section is marked with “B”). Line up the
arrows as described above. The lights will turn on once it drops into the correct placement.
D.
Adjust the branch tips for desired appearance (some people chose to perform this step when the tree is fully
assembled)
Step 4: Shape the Tree Top and Insert into the Middle Section
A.
Adjust the tips and shape the treetop before inserting into the middle section.
B.
Locate the notch, groove, and arrows as described above.
C.
Insert treetop into middle section (tree top is marked with “C”). Line up the arrows as described above. The
lights will turn on once it drops into the correct placement.
Step 5: Make final adjustments to tree tips and decorate if desired.
Safety First:
•
Unplug power supply cord when replacing bulbs and fuses.
•
NEVER
change fuse with the power supply cord plug in wall duplex.
•
Replace with GKI/Bethlehem lights only.
•
Avoid touching electric carrying parts with sharp or heavy objects.
•
Do not plug other products into the tree plugs.
Care Instructions:
•
If your tree has incandescent lights, be sure to replace burnt-out bulbs with replacement bulbs (included) as bulbs
burn out. This will extend the life of the remaining bulbs.
•
When not in use store in a cool dry location.
Trouble Shooting:
•
If a branch or section will not light, check to be sure that all the cords are plugged into the pole. Each section
should be plugged into one socket.
Indoor Use Only
Made in China
H201025NST042013
3
