background image

 

    

 

 

A safety strap has been placed around the plugs to ensure that the plugs do not fall out of the pole during shipping.  

This strap easily slides over the plugs to hold them tight.  Images shown are for reference only; your tree may differ 

slightly. 

 

If item still fails to light after checking all plugs are plugged in, look for a damaged, missing, or burnt-out bulb.  

Replace the bulb with included replacement bulbs. 

 

If the item still fails to light after checking all plugs are plugged in, check the fuse at the main power cord (part 

you plug into the wall socket) – use only 125 volt fuse, 5 amp maximum.

 

 

If your item has a foot pedal, try tapping the foot pedal once to turn on the lights.

 

 

Tree Storage: 

 

Step 1

: Unplug power cord. 

Step 2

: Remove decorations. 

Step 3

: Lift each section directly up. 

Step 4

: Separate the tree sections (starting at the top).  Fold branches up to avoid crushing the tips.  You can tie the 

branches up to make the sections easier to handle and set up in future years. 

Step 5

: Unscrew tree stand to release the bottom section.  Fold stand and tighten screws back into stand to prevent 

losing the screws. 

Step 6

: Store in cool dry area. 

Indoor Use Only 

 

Made in China 

 

H201025NST042013 

Summary of Contents for 6.5’ Norway Spruce IPT Ready Shape Tree

Page 1: ...ecorative embellishments please note that some movement is incurred during shipping but the beauty of the tree will not be diminished Setup Instructions NOTE Because our trees use high grade materials to ensure a long lifetime of beauty wearing long sleeves and gloves is recommended to protect your arms and hands from branches Step 1 Position and Set Up Tree Stand A Place tree stand in desired loc...

Page 2: ...l turn on once it drops into the correct placement E If the lights do not turn on refer to the Trouble Shooting portion of this document Do not drive the section down with force or forcefully turn the section Doing so may damage the plugs F Let the hinged branches fall into place G Adjust the branch tips for desired appearance some people chose to perform this step when the tree is fully assembled...

Page 3: ...ce it drops into the correct placement Step 5 Make final adjustments to tree tips and decorate if desired Safety First Unplug power supply cord when replacing bulbs and fuses NEVER change fuse with the power supply cord plug in wall duplex Replace with GKI Bethlehem lights only Avoid touching electric carrying parts with sharp or heavy objects Do not plug other products into the tree plugs Care In...

Page 4: ...e fuse at the main power cord part you plug into the wall socket use only 125 volt fuse 5 amp maximum If your item has a foot pedal try tapping the foot pedal once to turn on the lights Tree Storage Step 1 Unplug power cord Step 2 Remove decorations Step 3 Lift each section directly up Step 4 Separate the tree sections starting at the top Fold branches up to avoid crushing the tips You can tie the...

Reviews: