Beton Trowel nv
Nijverheidsstraat 11
1840 Londerzeel/Belgium
Tel: +32 (0)52 315 350 - Tel: +32 (0)52 315 351
Fax: +32 (0)52 303 739
E-mail: info@betontrowel.com
BE 0821.249.312
www.betontrowel.com
BNP FORTIS:
ING:
BE81 0015 9813 5624
BE
- GEBABEBB
BBRUBEBB
Pag.
9/19
Maintenance
1
Preventative maintenance and routine service plan.
This trowel has been assembled with care and will provide years of service. Preventative
maintenance and routine service are essential to the long life of your trowel. Your dealer is
interested in your new machine and has the desire to help you get the most value from it.
After reading through this manual thoroughly, you will find that you can do some of the
regular maintenance yourself. However, when in need of parts or major service, be sure to
see Beton Trowel.
AIR CLEANER
- Keep air filter clean at all times. Wash away dust and debris using a
non-oil based cleaning solvent. Let the filter dry before re-installing.
LUBRICATION
– Always check engine oil regularly. Use proper engine oil as
recommended. See chart on this page. Fill crankcase to levels as recommended in
manufacture’s engine manual.
SPARK PLUG
– Check and clean spark plugs regularly. A fouled, dirty or carboned
spark plug causes hard starting and poor engine performance. Set spark plug gap to
recommended clearance. Refer to engine manual.
BELT TENSION
–
IMPORTANT!
When the engine is switched off, and the machine has stopped, the normal belt play
should be loose. This is due to the clutch type. When the machine is running at full
throttle, the clutch will close in, which tightens the belt causing the gearbox to
engage.
When adjusting the belt make sure that the clutch is in alignment with the follower
pulley. Secure belt guard. Tighten all engine mount bolts, and tighten lock nuts.
