Beton Trowel nv
Nijverheidsstraat 11
1840 Londerzeel/Belgium
Tel: +32 (0)52 315 350 - Tel: +32 (0)52 315 351
Fax: +32 (0)52 303 739
E-mail: info@betontrowel.com
BE 0821.249.312
www.betontrowel.com
BNP FORTIS:
ING:
BE81 0015 9813 5624
BE
- GEBABEBB
BBRUBEBB
Pag.
15/40
Maintenance
1
Preventative maintenance and routine service plan
This trowel has been assembled with care and will provide years of service.
Preventative maintenance and routine service are essential to the long life of your
trowel. Your dealer is interested in your new machine and has the desire to help you
get the most value from it. After reading through this manual thoroughly, you will find
that you can do some of the regular maintenance yourself. However, when in need of
parts or major service, be sure to see Beton Trowel.
GENERAL
• Keep engine oil clean. Change according to engine manufacturer’s
specifications.
• Maintain the oil levels in the engine and gearbox assemblies. Change as
required.
• Use only clean fuel in the engine.
• Check for loose nuts and bolts on the trowel and tighten as necessary.
• Check “V” belts for wear, replace if worn.
• Grease all fittings daily. See diagram.
• Clean the unit after every use to prevent hardening of concrete residue. Hard
concrete is very difficult to remove, greatly increases weight and reduces
efficient subsequent operation of unit.
• Check clutch linings regularly for wear. Linings should be changed when 3/4
worn. Do not allow metal to metal contact as this will damage the clutch drum.
(New lining is 8mm.)
AIR CLEANER
Maintaining a clean engine will extend engine life. Keep air filter clean at all times.
Clean air filter using the recommended solvent. See engine manual for proper
cleaning procedure. Let the filter dry before reinstalling.
SPARK PLUG
Check and clean spark plugs regularly. A fouled, dirty spark plug causes hard
starting and poor engine performance. Set spark plug gap to recommended
clearance. Refer to engine manual.
