Beton Trowel nv
Nijverheidsstraat 11
1840 Londerzeel/Belgium
Tel: +32 (0)52 315 350 - Tel: +32 (0)52 315 351
Fax: +32 (0)52 303 739
E-mail: info@betontrowel.com
BE 0821.249.312
www.betontrowel.com
BNP FORTIS:
ING:
BE81 0015 9813 5624
BE
- GEBABEBB
BBRUBEBB
Pag.
3/40
Foreword
Quality assurance / machine break in
The Beton Trowel Ride-on Trowel is the product of extensive engineering
development designed to give long life and unmatched performance. Once machines
are fully assembled, a run-in test is performed to ensure quality standards of the
highest level. A series of operational tests are conducted on concrete, incorporating a
phase of operations at 1/2 to 3/4 throttle and a final run phase at full throttle for a
minimum of 20 minutes.
You can help ensure that your Ride-on will perform at top levels by observing a
simple routing on first use. Consider that your new Ride-on Trowel is like a new car.
Just as you would break in a new car to the road or any new machine to the job, you
should start gradually and build up to full use. Learn what your machine can do and
how it will respond. Refer to the engine manufacturer’s manual for run-in times. Full
throttle and control may be used after this time period, as allowed by material. This
will serve to further break in the machine on your specific application, as well as
provide you with additional practice using the machine.
We thank you for the confidence you have placed in us by purchasing a Beton
Trowel Ride-on Trowel and wish you many years of satisfied use.
