BETTE LOFT, Installation Instructions Manual

3

EN

Important information – 

Please note!

Key to symbols

Warning - risk of electric shock

Warning - risk of water damage

Warning of crushing

12 V

12 V electrical connection

Control cable

Water supply

Water drain

Incorrect installation

Cross-reference to other products or documents

General advice

•  The function, safety and integrity of the product are only 

guaranteed if the instructions given in this manual are 
adhered to. Non-observance of the safety instructions 
could lead to bodily injury and damage to property. 

•  The manufacturer is not liable for damage resulting from 

non-observance of the instructions.

•  To avoid installation errors and damage to the product, it 

is essential that the installation instructions are followed 
carefully. 

•  Besides the information given in this manual, please 

follow the relevant general safety and accident 
prevention regulations. 

•  This product left our factory in a condition complying 

with all the requirements of technical safety.

•  Figures are not true to scale
•  Subject to technical modifications.

Installation instructions

•  Installation may only be carried out by qualified specialist 

personnel.

•  Observe the special requirements for electric installations 

in wet rooms.

•  If it is not possible to drill into the sub-structure (e.g. 

due to underfloor heating) then the feet can be glued in 
place.

•  The tightness of the fittings to the bath tub must be 

checked and ensured when installing.

•  The underlying structure must be suitable for bearing the 

weight involved.

•  Handle this product with the utmost care to avoid 

damaging it. Rings and other objects that may damage 
the product must be removed before starting the 
installation work. 

•  Large, bulky or heavy items must be installed by two 

people.

Separate documents (e.g. for electrical connections) 
should be complied with.