6
Wall Hung Toilet Pan Fitting
After the wall frame has been set in the wall and the wall has been finished, the
installation of the toilet pan to the frame can begin.
1. Prepare the pipes as advised (cutting of the flush pipe and pan connector may be
required).
2. The threaded bars should be exposed from the frame through the wall, as shown
below.
3. It is advisable to apply a small amount of lubricant (washing up liquid) to the flush
pipe and pan connector to assist with fitting the toilet pan.
4. Connect the flush pipe and pan connector to the frame ready for connection to the
toilet pan as shown, then screw the female threaded connectors (fixing bolts) onto
the threaded bars so that the cut out aligns with the fixing hole in the toilet pan.
