background image

The two buttons are one-click

to fully open, will not stop 

unless you press the button 

The two button is manually

control, can stop at any

position you want 

 

Customer Service Support:  1-800-379-9773

11

10

Customer Service Support:  1-800-379-9773

First of all, check if local voltage is consistent with the transformer power supply

If available

then plug in, to set up an electric circuit.

The top of the hand controller comes with a USB port to facilitate 

charging of electronic products such as mobile phones.

1. Product require DC29V Power

Boot indicator light up after electrify

2. LIFT: Automatic lift function button. Just one click, the chair will lift up to top 

position

3. RECLINE:Automatic recline function button. Just one click, the chair will recline

to max unfold position

4. LIFT/RECLINE the 2 buttons can be changed at any time. For safety, when you 

click new button, the last function will stop, and execute new function. 

5.          Up arrow button: should keep pressing to work, the chair will get down,

then unfold to max recliner position.

6.          Down arrow button: should keep pressing to work, the back & footrest will

 recover, then lift up to top position.

7.          “Heat” key: Individual control switch

if users want the product to have

the spontaneous heat, they can press heating switch key for heating. 

The maximum heating value is 65

 and it takes about 5 minutes to reach the

maximum heating value. There is a built-in protective chip in the product, 

and the continuous heating will not make the heat value exceed the maximum peak

value.

8.          Time” key: timing regulation key. Press “10-20-30” to regulate the time and

the corresponding mode indication lamp will be on.

9.          Intensity” key: it has three-gear strength regulation key H-M-L. Press the 

key, the strength indication lamp will flicker and the strength will change

as per the sequence: M-L-H cycling.

10.        “Mode” key: it has three-mode switchover key. When the vibrating motor is

in a start state, the key can realize vibrating mode switchover,suchas 

M1→M2→M3→M1……and the corresponding indication lamp will be on i

n certain 

mode.

11.               Power On / Off

vibration massage power

.

Operation instructions

Hand Control Instruction

Automatic Lift 

Up Arrow

Heat

Heat Intensity

Automatic 

Reclining

Down Arrow

Timer

Massage

Modes

On/Off

Massage Power

Operating Instruction

Summary of Contents for BHT-10003








Reviews: