5
E. THE RECEIVER SENSITIVITY ADJUSTING MENU:
Keep pressing the set button until LCD screen displays “SQELCH” as shown
below:
After 2-3 seconds, the screen will display “XX* dB” (*various numbers,
depending on your current adjustments). This is the status of your receiver’s
current sensitivity level. You can press the “
▲
” or “
▼
” buttons to select a
different level. After you made your selection, the LCD screen will flash to
remind you to confirm, please press set to confirm.
If you want a more active signal between the transmitter and receiver
set the sensitivity level to at least 15dB. Setting the sensitivity level higher lets
the signal become active from a further distance.
F. SYSTEM LOCKING MENU:
Locking or Unlocking your system’s current statuses:
Keep pressing the set button until the LCD screen displays “LOCK”. After
2-3 seconds screen will display “LOC ON” or “LOC OFF” as shown above
(“LOC ON” means that system is locked [if system is locked the lock indicator
will display on the LCD screen, in this mode no adjustment can be made to
the system and system can not be powered off. “LOC OFF” means system is
unlocked, in this mode adjustments can be made to the system and power
can be powered off.) Press the “
▲
” button to switch to “LOC ON” to lock
system’s current status or press the “
▼
” button to switch to “LOC OFF” to
enable system adjustments.
If system is locked the lock indicator will be on.
5 q E L C H
RF
M
H
Z
5 10 15 20 25 30 35
40
AF
-30 -25 -20 -15 -10 -5
0 PEAK
NOTE
NOTE
1 5
RF
M
H
Z
5 10 15 20 25 30 35
40
AF
-30 -25 -20 -15 -10 -5
0 PEAK
p
l o c o f f
RF
M
H
Z
5 10 15 20 25 30 35
40
AF
-30 -25 -20 -15 -10 -5
0 PEAK
l o c o n
RF
M
H
Z
5 10 15 20 25 30 35
40
AF
-30 -25 -20 -15 -10 -5
0 PEAK
