BA-1000 Automatic Air Duct Purifier Set-up Manual
1.
Disinfect
straw with antibacterial swab provided.
2.
Avoid placing in or near high temperatures (~140 degrees Fahrenheit) or in a wet environment
3.
Unit must be kept in upright position. Do not lay flat or place sideways
4.
Keep air circulating
5.
Clean and maintain the system regularly.
6.
Do not attempt to repair this machine without speaking with factory
7.
Do not connect to a unsafe power supply, make sure unit is grounded
8.
The power supply should be located out of the reach of children
9.
Do not use system during lightning storm unless protected by a properly sized surge protector.
10.
Unplug power supply before cleaning or maintaining the unit
11.
Do not use dangerous or poisonous chemicals with equipment; only use hot water for cleaning.
12.
Do not sit or stand on the equipment. Do not stand under the unit during installation.
13.
Unit will not operate properly if positioned sideways or upside down. BA-008 must be installed level.
14.
The BA- 1000 Probiotic bottle should not be refilled by any liquid other than Better Air Probiotic refill supplied by
the manufacturer
BA-1000 Safety Precautions:
Please read the manual carefully before installation.
Basic Set-Up
1. Plug in the power supply
2. Press the
for 5 seconds to tu
rn
on the system
3.Plug & Play- The system is ready for use
Basic Overview of Installation on HVAC systems
1)
The BA-1000 unit includes a metal cabinet that can be mounted on any wall supporting 45lbs. Inside the cabinet
is an oil less air compressor, preprogrammed control system and a liquid container with our probiotic solution.
2)
Once control system operates the compressor the fluid is dispersed into micron-sized droplets which enter the
air duct and are carried by the airflow through the ducts and out of the grills, delivering a safe probiotic layer into
the indoor environment.
