7. INSTALLING THE MECHANICAL STRUCTURE
Wrong or bad installation may cause accidents. Read the instructions carefully so that the product is properly fixed and cannot fall out.
Check the condition of the structure to which the flyscreen or blind will be anchored/fixed. The dynamic load the fully unwound flyscreen must bear is that of a 130 km/
hr wind.
Black-out or filter blinds may be fitted to a wall or door/window: the choice of plugs for wall fitting and screws for door/window fitting depends on the type and condition
of the wall or door/window.
Fitting black-out or filter blinds to a wall: we advise the use of 3x30mm countersunk head screws with Euro4 nylon rawl plug for securing the bottom shoes and top, and
4x40mm countersunk head screws with Euro6 nylon rawl plug for fixing the rails.
Fitting black-out or filter blinds onto a door or window: we advise the use of 3x20mm countersunk head screws for securing the bottom shoes and top, and 3x12mm countersunk head
screws for fixing the rails. Where hollow bricks are involved use expansion rawl plugs with a suitable amount of chemical adhesive.
If the necessary resistance for safe fixing is not ensured, increase the number of rawl plugs and screws. The choice of screws and rawl plugs also depends on the condition and type of
the wall/metal/door/window structure onto which the product will be fitted. Plugs and screws are not provided.
Take care when handling the product: the rollers are spring loaded.
Fitting instructions are given on the sheet in the packing. If it is necessary to seal, use neutral silicone resin.
8. MAINTENANCE
8.1 Routine Maintenance
As the materials used in manufacturing our flyscreens/blinds are of top quality, no routine maintenance is necessary apart from occasional cleaning of the fabric or mesh to prevent
the formation of mould caused by dust or other matter. Make a visual check of the fabric or mesh at least twice a year; with regard to the mesh, in spring before summer opening and
in autumn before winter closing. Use a vacuum cleaner to clean dust off fabric or mesh. If the fabric is marked “WASHABLE” in the catalogue it can be washed with a sponge or cloth
soaked in warm water. Dry the fabric or mesh after cleaning and before rewinding. DO NOT use solvents, ammonium or hydrocarbons for cleaning.
WARNING: the use of ladders, folding mobile scaffolds or other is reserved for specialists who will perform cleaning operations according to safety regulations and using
personal protection equipment such as safety harnesses with fall arrester ropes (see Italian Legislative Decree 81/2008).
8.2 Extraordinary Maintenance
ATTENTION: all extraordinary maintenance operations must be performed by professionally qualified trained personnel: for this reason hire a specialist.
To dismount your flyscreen and/or black-out or filter blind, or any part of it, see the fitting instructions. If the mesh or fabric is torn, even slightly, it must be replaced.
The warranty will not be valid if original spare parts are not used.
9. WARRANTY
The warranty is applied as per Italian Legislative Decree No. 24 of 02.02.2002 and later amendments.
T
he warranty covers the operation of the product and the materials comprising it, excluding indirect damage. The warranty does not cover any costs incurred to reach
the location of the product under warranty and any fitting or removal costs.
For duration and validity of the warranty (24/12 months according to whether the sale was to a private individual or company/professional) please refer to the fiscal sales receipt and
the label on the product.
In any case, to take advantage of the warranty the purchaser must report the fault in writing to the seller within two months of its occurrence, otherwise the warranty will be null and
void.
9.1 Manufacturer’s Warranty
Notwithstanding the terms of law, for products manufactured from 01/01/2016 Bettio Service spa provides a manufacturer’s warranty as per art. 133 of Italian Legislative Decree
206/2005 exclusively on the plastic and mechanical parts of the products.
The conditions of this warranty are given below. They do not affect statutory rights:
a) Validity of this manufacturer’s warranty is ten years from the production date indicated on the product ID label.
b) This manufacturer’s warranty refers solely to the repair and/or replacement (labour included and without costs) of the plastic and mechanical parts of the products.
53
Sicurezza - Normative
Safety - CE rules
Sicherheit und Vorschriften
Sècuritè et normes
Seguridad y normas
l’innovazione della zanzariera
Summary of Contents for Scenica
Page 67: ......
