Beuchat Mundial 3, User Manual

10

© 2002 Design, 2014

Doc. No. 12-5372-r01 (4/23/14)

User Manual

•  A (< 2 sec) - to step forward through selections of OFF, ON, and SET (Fig. 7B).

•  M (< 2 sec) - to step back through the selections.

•  S (< 2 sec) - to save the selection.

>> If OFF or ON is selected, operation reverts to the Lead-in screen.

>> If SET is selected, the Set CDT screen is displayed.

•  S (2 sec) - to revert to CDT Lead-in, if no setting change.

•  M (2 sec), or 2 minutes of no button action, will revert to Watch Default Time.

Set CDT, 

information includes (Fig. 8):

>  Graphics TIMR and SEt.

>  Timer setting (hr:min) with TIME icon, with Hour digits flashing. 

•  A (hold) - to scroll upward through Hour Set Points (8/sec) from 0: to 23: in increments of 1: (hr). 

•  A (< 2 sec) - to step upward through Hour Set Points.

•  M (< 2 sec) - to step back through Set Points.

•  S (< 2 sec) - to save the Hour setting and flash the Minute digits.

•  A (hold) - to scroll upward through Minute Set Points (8/sec) from :00 to :59 in increments of :01 (min). 

•  A (< 2 sec) - to step upward through Minute Set Points.

•  M (< 2 sec) - to step back through Set Points one at a time.

•  S (< 2 sec) - to save the CDT setting and revert to the CDT Status screen with SEt flashing, allowing ON or OFF to be selected 

as previously described.

>  ON will then start the countdown and revert to CDT Lead-in.

>  OFF will save the setting and revert to CDT Lead-in.

The CDT will run in the background until it counts down to 0:00, or it is set OFF, or FREE Mode is accessed or a dive is started in 

which case the countdown will terminate and revert to OFF.

When CDT reaches 0:00, the Audible will sound during which 0:00 with the CDT icon will flash on the Watch Default Time screen. 

DAILY ALARM 

When set On, the Daily Alarm will -

>  be synchronized with Watch Default Time.

>  sound the Audible every day at the Time set, while operating in Watch Mode.

>  not sound the Audible while operating in FREE Mode. 

>  run in the background until set Off.

Daily Alarm Lead-in, 

information includes (Fig. 9):

>  Graphics Go To and dAY AL with icon.

•  S (< 2 sec) - to access Daily Alarm Status.

•  A (< 2 sec) - to step forward to Set Time Lead-in.

•  M (< 2 sec) - to step back to CDT Lead-in.

•  M (2 sec), or 2 minutes of no button action, will revert to Watch Default Time.

Daily Alarm Status, 

information includes (Fig. 10): 

>  Graphic ALRM.

>  Alarm Time (hr:min) with TIME icon, and AM (or PM) icon if 12 Hour Format.

>  Graphic ON (or OFF) flashing, with Alarm icon.

•  A (< 2 sec) - to step forward through the selections of OFF, ON, and SET. 

•  M (< 2 sec) - to step back through the selections.

•  S (< 2 sec) - to save the selection, and - 

>  if OFF or ON is selected, revert to Daily Alarm Lead-in.

>  if SET is selected, the Set screen is displayed.

•  S (2 sec) - to revert to Daily Alarm Lead-in, if no setting change.

•  M (2 sec), or 2 minutes of no button action, will revert to Watch Default Time.

Set Daily Alarm, 

information includes (Fig. 11):

>  Graphics ALRM and SEt Alarm icon.

>  Alarm Time (hr:min) with icons, Hour digits flashing.

•  A (hold) - to scroll upward through Hour Set Points (8/sec) from 0: to 23: in increments of 1: (hr). 

•  A (< 2 sec) - to step upward through Hour Set Points.

•  M (< 2 sec) - to step back through Set Points.

•  S (< 2 sec) - to save the Hour setting and flash the Minute digits.

•  A (hold) - to scroll upward through Minute Set Points (8/sec) from :00 to :59 in increments of :01 (min). 

•  A (< 2 sec) - to step upward through Minute Set Points.

•  M (< 2 sec) - to step back through Set Points.

•  S (< 2 sec) - to save the Alarm setting and revert to the Daily Alarm Status screen with SEt flashing, allowing ON or OFF to be 

selected as previously described.

Fig. 7B - CDT STATUS

(to access Set)

Fig. 8 - SET CDT

(hr:min)

Fig. 9 - DAILY ALARM 

LEAD-IN

Fig. 10 - DAILY ALARM 

STATUS (set, ready)

Fig. 11 - SET DAILY 

ALARM (hr:min)

or 

OFF