Beuchat Mundial 3, User Manual

18

© 2002 Design, 2014

Doc. No. 12-5372-r01 (4/23/14)

User Manual

Set SRT (Surface Recovery Time) Alarm, 

information includes (Fig. 29):

>   Graphic SRT.

>   Recovery Time (min:sec) with SURF & TIME icons.

>   Graphic OFF (or ON), flashing upon access.

•   A (< 2 sec) - to step forward through the selections of OFF, ON, and SEt. 

•   M (< 2 sec) - to step back through the selections.

•  S (2 sec) - to step back to Set Audible.

•   S (< 2 sec) - to save the setting.

>  If OFF or ON is saved, operation will advance to Set EDT Alarm.

>  If SEt is saved, the Minute digits will flash.

•   A (hold) - to scroll upward through the Minute Set Points at a rate of 8 per second from 0: to 30: in increments of 1 minute.

•   A (< 2 sec) - to step upward through the Minute Set Points one at a time.

•   M (< 2 sec) - to step back through the Minute Set Points one at a time. 

•  S (2 sec) - to step back to SEt flashing.

•   S (< 2 sec) - to save the Minute setting and flash the Seconds digits.

•   A (hold) - to scroll upward through the Second Set Points at a rate of 8 per second from :00 to :59 in increments of 1 second.

•   A (< 2 sec) - to step upward through the Second Set Points one at a time.

•   M (< 2 sec) - to step back through the Second Set Points one at a time. 

•  S (2 sec) - to step back to the Minutes digits flashing.

•   S (< 2 sec) - to save the min:sec setting (digits solid) and flash the graphic SEt allowing ON or OFF to be selected/saved.

Set EDT (repeating Elapsed Dive Time) Alarm, 

information includes (Fig. 30):

>   Graphic EDT.

>   Time (min:sec) with TIME icon.

>   Graphic OFF (or ON), flashing upon access.

•   A (< 2 sec) - to step forward through the selections of OFF, ON, and SEt. 

•   M (< 2 sec) - to step back through the selections.

•   S (2 sec) - to step back to Set SRT Alarm. 

•   S (< 2 sec) - to save the setting.

>  If OFF or ON is saved, operation will advance to Set RDI Alarm.

>  If SEt is saved, the Minutes digits will flash.

•   A (< 2 sec) - to step upward through the Minute Set Points one at a time from 0: to 9: in increments of 1 minute.

•   M (< 2 sec) - to step back through the Minute Set Points one at a time. 

•  S (2 sec) - to step back to SEt flashing.

•   S (< 2 sec) - to save the Minute setting and flash the Seconds digits.

•   A (hold) - to scroll upward through the Second Set Points at a rate of 8 per second from :00* to :59 in increments of 1 second.

*Starts at :10 (10 seconds minimum) when Minutes are set for 0.

•   A (< 2 sec) - to step upward through the Second Set Points one at a time.

•   M (< 2 sec) - to step back through the Second Set Points one at a time. 

•  S (2 sec) - to step back to the Minutes digits flashing.

•   S (< 2 sec) - to save the min:sec setting (digits solid) and flash the graphic SEt allowing ON or OFF to be selected/saved.

Set RDI (Repeating Depth Interval) Alarm, 

information includes (Fig. 31):

>  Graphic RDI.

>  Depth interval with FT (or M) icon.

>  Graphic OFF (or ON), flashing upon access.

•   A (< 2 sec) - to step forward through the selections of OFF, ON, and SEt. 

•   M (< 2 sec) - to step back through the selections.

•   S (2 sec) - to step back to Set EDT Alarm. 

•   S (< 2 sec) - to save the setting.

>  If OFF or ON is saved, operation will advance to Set DD1 Alarm.

>  If SEt is saved, the Depth digits will flash.

•   A (hold) - to scroll upward through the Depth Set Points at a rate of 8 per second from 3 to 33 M (10 to 100 FT) in increments 

of 3 M (1 FT).

•   A (< 2 sec) - to step upward through the Set Points one at a time.

•   M (< 2 sec) - to step back through the Set Points one at a time. 

•  S (2 sec) - to step back to SEt flashing.

•   S (< 2 sec) - to save the setting (digits solid) and flash the graphic SEt allowing ON or OFF to be selected/saved.

Fig. 31 - SET RDI ALARM

Fig. 30 - SET EDT ALARM

Fig. 29 - SET SRT ALARM