Beurer GL44
23
2
Image 2
3
Pressing the rocker switch “–” [6] will display the previous measured value each time. You
can display a maximum of 480 previous measurements.
4
You can cancel the process at any time. To do so, press the On/Off button or wait until the
device switches itself off automatically after 2 minutes.
6.2 Displaying average blood glucose values
You can display the average measured blood glucose value from the last 7, 14, 30 and 90 days.
1
Switch the monitor on using the On/Off button [4]. The initial display is shown briefly. Press
the “+” rocker switch [6] twice.
The measurement unit of the blood glucose value, “
” and the average value are displayed.
2
Press “+” [6] repeatedly to display the average value for 7, 14, 30 and 90 days.
3
You can cancel the process at any time. To do so, press the On/Off button or wait until the
device switches itself off automatically after 2 minutes.
No. Explanation
1
2
3
1
2
3
1 Average value
2 Number of days, e.g. 7
3 Number of saved val-
ues used to calculate
the average