31
10 Operation
Measuring weight
1 Switching on the scale
•
Press the [ ] button on the control unit.
0.0 kg appears on the display. The scale is now ready for
measurement.
2
Weighing (without diagnosis)
Set up the scale on a level and solid surface. A solid surface is a pre-
requisite for a correct measurement.
•
Now step onto the scale. The indicator [3] on the scale
lights up green.
Stand still with your weight distributed evenly on both legs.
Stand with your feet as far apart as possible without tipping
the scales.
If you hold the control unit in your hands, its weight
(300 grammes) is automatically deducted.
Once the measurement has been taken, the result will be
displayed for approximately 10 seconds.
When you step off the scale, the scale will switch off after a few seconds. The
indicator [3] goes out. The measurement is not saved.
Carrying out an analysis
1 Switching on the scale
•
Press the [ ] button on the control unit.
0.0 kg appears on the display.
2 Diagnostics
•
Switch the device on and select your user number from
1 to 10 by pressing the right-hand button [
U
]. To do so,
press the button repeatedly if necessary.
•
Press the [SET] button or wait 3 seconds. The meas-
urement screen is shown on the display.
If you activate the “guest” user, you must re-enter the user data before
each measurement. User data and measurement values are not saved in
guest mode. You have the option of switching guest mode on or off, see
page 29.
•
Now step barefoot onto the scale
and hold the control unit firmly in
your hands. (If you hold the control
unit in your hands, its weight
(300 grammes) is automatically de-
ducted.)
90
90
www.TopSport.com.ua
Beurer BF 100
