14
5. Unit description
Overview
1. Electrodes
2. Down button
3. Set button
SET
4. Up button
5. Display
6. Initial use
Inserting the batteries
If there is one, remove the plastic insulating strip by pulling it from the battery compartment lid and remove
the protective film from the batteries, then insert them the correct way round. If the scale does not func-
tion, remove the batteries completely and reinsert them.
Changing the weight unit
When supplied to the customer, the scale is set to weigh in “kg”. Switch on the scale by briefly applying
pressure to the standing surface with your foot (approx. 1-2 seconds). Wait until “ kg” appears in the
display. To the rear of the scale, there is a button where you can select “pound” and “stones” (lb, st).
Positioning the scale
Place the scale on an even, hard surface (no carpet); a hard surface is crucial to accurate measurements.
7. Entering user data
To calculate your body fat percentage and additional body values, you must save the personal user data.
The scale has 8 user memory spaces which allow you and members of your family to save and access
personal settings, for example.
• Place the scale on an even, hard surface (no carpet); a hard surface is crucial to accurate meas-
urements.
• Switch on the scale by briefly applying pressure to the standing surface with your foot (approx. 1-2 sec-
onds). Wait until “ kg” appears in the display.
• Start the setting by pressing the
SET
button. The first memory space flashes in the display.
• Press the / button to select the desired memory space and confirm by pressing the
SET
button.
• You can now make the following settings:
User data
Set values
Users/persons
P-1 to P-8
Height
100 to 220 cm (3' 3.5" to 7' 2.5")
Age
10 to 100 years
Gender
Male ( ), female ( )
Activity level
1 to 5
1
2 3
4
5
Summary of Contents for BF 530
Page 75: ...75 ...
Page 76: ...76 751 818 1214 Irrtum und Änderungen vorbehalten ...
