19
Note: Measurements that are saved on the baby scale without it having been previously
synchronised with the app cannot be transferred�
1� Place the baby scale on an even, hard surface; a hard surface is crucial for correct
measurement�
2� Press the ON/OFF/TARE button to switch on the baby scale� "app" flashes on the
display for 120 seconds� Press any button to use the baby scale without the app�
3� As soon as "
0,000
kg" appears on the display, the baby scale is ready to take measurements�
4� Now place the baby on the weighing surface� Do this very carefully; do not let the baby fall
and take particular care with the baby's head�
5� The weight is displayed for 120 seconds and then it switches off automatically� Press the
ON/OFF/TARE button to take another measurement� To switch off the scale manually,
press and hold the ON/OFF/TARE button for 3 seconds�
Subsequent synchronisation with the app
If you have not synchronised the baby scale with the "beurer BabyCare" app during initial
use, you can also do this later�
1� Press the ON/OFF/TARE button to switch on the baby scale�
2� "App" flashes on the display of the baby scale for 10 seconds� If the app is open, the baby
scale can be connected for 10 seconds�
Alternatively:
Press the
Bluetooth
®
button whilst the baby scale is in operation� If the app is open,
the baby scale can be connected for 120 seconds�
3� The baby scale is successfully connected to the app once the Bluetooth® symbol
illuminates permanently in the display�
Transfer of the measurements
A maximum of 10 measurements can be stored�
• Press the
Bluetooth
®
button � starts to flash in the display (120 seconds) until the app
is opened� The
Bluetooth
®
symbol is then shown continuously in the display when there
is a successful connection until the data is transferred� After successful transfer of the
measurements, the scale switches off automatically�
Deactivating the AUTO HOLD function
If you wish to use the baby scale without the AUTO HOLD function, you can deactivate the
AUTO HOLD function�
1� Once "
0.000
kg" appears on the display, the AUTO HOLD function can be deactivated by
pressing the HOLD button for 3 seconds�
2� As soon as "
0.000
kg" appears on the display, the baby scale is ready to take measurements�
3� Now place the baby on the weighing surface� Do this very carefully; do not let the baby fall
and take particular care with the baby's head�
4� To establish the baby's weight, press the HOLD button� The recording of the weight is con-
firmed in the display when the HOLD symbol flashes for 5 seconds�