20
5� The weight is displayed for 120 seconds and then it switches off automatically� Press the
ON/OFF/TARE button to take another measurement� In order to manually switch off the
baby scale, press and hold the ON/OFF/TARE button for 3 seconds�
6� To reactivate the AUTO HOLD function, press and hold the HOLD button for 3 seconds�
Note: If the HOLD ON appear in the display, the AUTO HOLD function is
activated�
TARE function
If you prefer not to place the baby directly onto the weighing surface, but instead onto a hand
towel, for example, you must place the hand towel on the baby scale before switching it on�
IIf you have placed a towel or other objects on the baby scale when it is already switched
on and you would like to remove these again before weighing, you can also use the TARE
function� Once you have pressed the TARE button, "TARE" is shown in the display� To reset
the baby scale to "
0,000
kg", you have to remove the towel or additional weight from the
baby scale and press the TARE button again�
Using the tape measure
Pull out the tape measure on the top of the baby sca-
le if you want to measure the baby� In order to reel the
tape measure back into the baby scale, press the
round button next to the tape measure on the bot-
tom of the baby scale� You can manually enter the
height and head circumference of your baby in the
"beurer BabyCare" app�
7. Additional information
Saving the measured values on the baby scale and transferring them to the app
A maximum of 10 measurements can be saved in the baby scale� The saved measurements
are transferred automatically to the app if you open the app within the
Bluetooth
®
range and
Bluetooth
®
is switched on on the scale�
It is not possible to automatically transfer data when the baby scale is switched off�
Deleting scale data
In order to completely delete all measurements on the baby scale, press and hold the
Bluetooth
®
button for 5 seconds�
Changing the batteries
Your scale is equipped with a low battery indicator� If you operate the scale with flat batteries,
" " will appear on the display and the scale will automatically switch off� In this case, the
batteries must be replaced (3 x 1�5 V AAA)� All saved measurements remain saved�
Note:
• You have to re-synchronise the baby scale with the app (see "Initial use with the app"
section) after replacing the batteries�
• When replacing the batteries, use batteries of the same type, make and capacity�
• Do not use rechargeable batteries�
• Use batteries free from heavy metals�
