19
6 Operation
Important
•
Straighten the mains cable [9] if it
becomes twisted.
•
Do not pull, twist or kink the mains
cable [9]; do not pull or lay it across/on
sharp, pointy objects or hot surfaces.
•
Do not clamp the mains cable [9], for
example in drawers, doors or between the
heating plates [1, 2].
Warning
•
Stand on a dry, electrically non-conductive
surface.
•
Ensure that your hands are dry!
•
Your hair must be dry!
•
Depending on the temperature setting and
duration of use, the unit can become very
hot. If the unit is hot, touch it only by its
handle [6] – burn and fire hazard!
•
Do not touch the heating plates [1, 2]!
•
Do not touch the attachments as long as
they are still hot!
•
Do not clamp any objects between the
heating plates [1, 2] and the barrel and the
curling tong.
•
Switch the unit off immediately if it is
defective or malfunctioning.
Changing attachments
Warning
•
When the attachment is in place on the
unit, always let it cool down before
removing it – burn hazard!
•
Select the right attachment [12, A, B, C] for
the desired hairstyle.
•
Turn the lock ring [10] clockwise until it
stops. The attachment is unlocked.
•
Remove the attachment from the handle [6].
•
Align the selected attachment as shown in
the figure.
•
Push the selected attachment carefully into the
handle [6], without jamming the two metal pins.
•
Turn the lock ring [10] anti-clockwise until it
stops. The attachment is locked.
•
Check whether the attachment is firmly
connected with the handle.
•
Lay the multi-function styler or place it with
the stand unfolded [13] onto a stable,
horizontal and non-combustible surface or
hold the multi-function styler in your hand to
let it cool.
