53
9. Measuring object temperature/room temperature
Object t
emper
atur
e mode
If you want to measure an object temperature with this ther-
mometer, switch to object temperature mode.
• With the thermometer switched on, briefly press the
MODE/MEM
button. The device switches to the object
temperature mode (Fig. 16).
• Hold the thermometer 2 to 3 cm from the measuring
point. Briefly press the
SCAN
button and read the tem-
perature on the display (Fig. 17).
The device automatically switches off after approx. 60 sec-
onds or you can press the button to switch it off.
Fig. 16
Fig. 17
Measurements taken in object temperature mode are not stored.
Room t
emper
atur
e mode
If you want to use the thermometer to measure the room temperature you
need to switch to room temperature mode.
• With the thermometer switched on, briefly press the
MODE/MEM
but-
ton twice.
The device switches to room temperature mode
.
• The room temperature is immediately displayed (Fig. 16).
The device automatically switches off after approx. 60 seconds or you can
press the button to switch it off.
Fig. 18
Measurements taken in room temperature mode are not stored.
Summary of Contents for FT 95
Page 239: ...239 ...
