Beurer GL43, Instructions For Use Manual

Beurer GL43 mg/dL 

25

3

Follow the information on data transfer and evaluation provided in the software and the in-

structions for use of the software.

8.  s

torinG

, 

maintaininG

and

disinfectinG

the

device

Storing

Keep the Beurer GL43 blood glucose monitor in the case supplied after each measurement and do 

not expose it to direct sunlight.

 Note

•  Do not store the device, test strips and control solution in your vehicle, in the bathroom or in a cool-

ing appliance!

•  Retain these instructions for use.

•  The device needs to be at the location at wich the measurement is taken for at least 30 minutes be-

fore use. Please note the operating range of +10 °C to +40 °C. Accurate results cannot be guaranteed 

for measurements made outside of this temperature range.

8.1 Cleaning 

Device

Only clean the device when it is switched off.

Clean the surface of the device using a soft, slightly damp cloth (water or a mild cleaning solution). 

Dry the device using a lint-free cloth.

Make sure that moisture does not enter the test strip insertion slot. Do not spray cleaning agent di-

rectly on the device. Do not submerge the device in water or any other fluids and make sure that no 

fluids can get into the device.

Lancing device

Clean the surface of the lancing device using a soft, slightly damp cloth (water, a mild cleaning so-

lution or rubbing alcohol). The lancing device must not be immersed in water or other liquids or be 

cleaned in the dishwasher. Dry the lancing device using a lint-free cloth.

8.2 Disinfection

Device

Please comply with the generally applicable guidelines on disinfection when using the device on dif-

ferent persons. Do not submerge the device in disinfection solutions or any other fluids and make 

sure that no fluids can enter the device.

 Note

The blood glucose monitor is made of precision components. The accuracy of the measurements 

and service life of the device depend on its careful handling:

•  Protect the device from impacts and do not drop it.

• Protect the device from damaging factors such as moisture, dirt, dust, blood, control solution or 

water, strong temperature fluctuations, direct sunlight and extreme cold.