background image

Beurer GL43 mg/dL 

7

Verwendbar bis

 

Art.-Nr.

Order number

Maximale Haltbarkeit nach

Anbruch in Monaten

Unit of measurement for blood 

glucose value

Chargenbezeichnung

Biohazard, risk of infection

Achtung, Begleitdokumente 

beachten

Sterilisation durch Bestrahlung 

(Lanzetten)

In the Instructions for use, the symbols represent the following:

 Warning

Warning instruction indicating a risk of injury or damage to your health / your patient’s health.

 Important

Safety note indicating possible damage to the unit/accessory.

 Note

Note on important information.

2.  w

arninGs

 

and

 

safety

 

notes

Risk of infection

All components of the blood glucose monitor and its accessories may come into contact 

with human blood and are therefore a possible source of infections. 

 Warning

•  This blood glucose monitor must display the blood glucose content in mg/dL. The unit of meas-

urement mg/dL accompanies each blood glucose value. Please contact Customer Services if 

the device does not display mg/dL. You risk damaging your health if you measure your blood 

glucose value using a unit of measurement with which you are not familiar, misinterpret the 

values and therefore take incorrect measures.

•  When using the blood glucose monitor for various persons, observe the generally applicable regula-

tions regarding disinfection, safety and contamination.

•  Medical carers and others who use this system on several patients must be aware that all products 

or objects that come into contact with human blood must be handled, even after cleaning, as though 

they could transfer pathogens.

•  The lancing device is suitable for self-testing. Do not share the lancing device or lancet needles with 

others or amongst various patients 

(risk of infection!)

.

• Use a new, sterile lancet needle for each blood sample (

for single use only

).

Summary of Contents for GL43





































Reviews: