Beurer GL44 lean
19
5.3 Reading the result and labelling measurements
Reading the result
As soon as the gap is su
ffi
ciently filled with blood, the device performs the blood glucose measure-
ment. The monitor counts down for approx. five seconds.
The measurement is then shown on the display.
Read the measured value. For explanations and actions for the measured values, see chapter “5.5
Evaluating measured blood glucose values”. If an error message is displayed, read chapter “8. What
if there are problems?”
Labelling measured values
You have the following options to label measured values.
Before meals.
After meals.
General labelling (e.g. after exercising).
Labelling measured values enables you, your GP or diabetes consultant to better monitor your blood
glucose values. For example, you can display the average values of all measurements taken before
meals.
The measured value can be labelled as soon as it is displayed. You cannot label it later.
For this purpose, briefly press the labelling button [3].
a) Pressing once labels the value with .
b) Pressing again labels the value with .
c) Pressing yet again labels the value with .
d) Pressing a final time removes the label.
The selected label is stored in the memory of the device when it is switched o
ff
.
