Now the scales are ready to measure your weight.
Stand still on the scales with your weight distributed evenly on both legs.
The scales immediately start measuring your weight. The display flickers until
your weight has been recorded. A moment after, your measured weight is
displayed with the memory number beneath (Fig 5).
Note:
M1 is the most recent measurement, M10 is the value that has been
stored longest. Stored values thus automatically shift back one space every
time you weigh.
The scales switch off a few seconds after you step down. The measured
result remains visible during this time.
3.4 Calling up the stored values
When ‚00.0‘ is displayed or after weighing, press the required personal memory button twice. If you keep
pressing this memory button repeatedly, you can read the previous stored values. The weight with memory
space appears in the display.
Note:
When a different personal memory is used from the one first selected, Figure 4 appears in the
display before changing to the new personal memory.
3.5 Deleting the stored values
‚With ‚00.0‘ in the display, depress the button for 5 seconds of the personal memory where you wish to
delete the stored values.
Fig.4
Fig.5
