18
IMPORTANT
• Please note that the heating pad may not be dry cleaned, wrung out, tumble dried, put through a
mangle or ironed. Otherwise the heating pad may be damaged.
This heating pad is machine-washable. For this purpose, close the hook-and-loop fastener of the heating pad
and place it in a pillow case. Set the washing machine to a particularly gentle wash cycle at 30 °C (wool cycle).
For ecological reasons, always wash the heating pad together with other textiles.
Use a delicate laundry detergent and measure it out according to the manufacturer’s instructions.
IMPORTANT
• Please note that frequent washing of the heating pad has a negative effect on the product.
The heating pad should therefore be washed in a washing machine a maximum of 10 times during its life.
Let the heating pad dry flat on a clothes horse.
IMPORTANT
• Do not use pegs or similar items to attach the heating pad to the clothes horse, otherwise the
heating pad may be damaged.
• Only reconnect the heating pad to the battery pack (2) once the heating pad and the connector
plug of the connection cable (5) are completely dry, otherwise this could damage them.
7. Storage
If you do not plan to use the heating pad for a long period of time, we recommend that you store it in the
original packaging.
IMPORTANT
Please allow the heating pad to cool down before storing. Otherwise
the heating pad may be damaged.
To avoid making sharp bends in the heating pad, do not place any
objects on top of it whilst storing.
IMPORTANT
The battery pack should be charged 1x per year to maintain its capacity.
8. Accessories and replacement parts
For replacement parts and additional items visit www.beurer.com or contact the corresponding service ad-
dress in your country (according to the service address list).
Replacement parts and additional items are also available from retailers.
• Battery pack (item des. 108.303)
• Charger (item des. 546.007)
• Extension strap (item des. 162.685)
9. What if there are problems?
Problem
Cause
Solution
The blue LED display for the temperature
settings (6) does not light up when:
– the battery pack is connected to the
heating pad and
– the button for controlling ON/OFF and
temperature settings has been pressed.
The battery pack has been fully run
down.
Charge the battery pack.
There was a SAFETY SWITCH-OFF
due to an error.
Allow the heating pad to
cool down to room tempe-
rature and switch on again.
Summary of Contents for HK 72 Akku
Page 111: ...111 ...
