MODELS:
NC27-1-W, NC33-1-W, NC41-1-W, NC49-1-W
Product Registration
R
EAD AND SAVE THIS INSTRUCTIONS
The information contained in this
Owner's Guide
will instruct you on how to
properly operate and care for your product. Please read through the information
contained in your literature pack to learn more about your new appliance.
Record Your Model and Serial Numbers
Record the Model No. and Serial No. of this freezer in the space provided
below. The nameplate is located at the back of the equipment.
Model No.
: _____________________________________
Serial No.
: _____________________________________
Energy Saving Ideas
1.
The freezer should be located in the coolest area of the room, away from
heat producing appliances or heating ducts, and out of direct sunlight.
2.
Overloading the freezer forces the compressor to run longer. Do not
exceed the load limit according to labels fixed on the inner cabinet (which
corresponds to the baskets height) since the product will start warming up
instead a cooling down and the compressor will run longer.
3.
Product to be loaded should be at -4° F (-20° C) since the equipment is
intended for maintaining a cool product at 0° F (-18° C) at load level rather
than cooling or freezing up a warm product
4.
Grids at the side and backside of the freezer should not be interfered
allowing a clear space of 4” (10 cm.)
5.
Assure keeping the lids closed to avoid warm air and moisture get into the
freezer.