BewellConnect - BWHB16 - User Manual - 022017v1
BewellConnect - BW-HB16 - User Manual - 022017v1
14
15
- Press and hold the button until the tracker
starts to vibrate. Your smartphone will then
ring or vibrate (depending on the mode ac-
tivated).
Attention: This function will only work if your tracker is located with-
in the area of Bluetooth coverage of your smartphone and if the
BW-MyCoach®Pulse application is open on your smartphone (even in the
background).
B. ANTI LOST
Your activity tracker is equipped with an “ANTI-LOST” function. As
soon as your BW-MyCoach®Pulse tracker is separated from your
smartphone by a distance of more than about 32 feet, it begins to
vibrate to indicate to you that you are moving away from it.
4.4.7. ALARM MODE
- You can program up to 10 daily alarms to trigger reminders
(medication, drink water, exercise, etc.).
- To add, modify, or delete an alarm, open the BewellConnect®
application and then click on the BW-MyCoach®Pulse icon. In the
menu, click on ”Alarms“ and follow the instructions.
4.4.8. NOTIFICATIONS
Over 120 compatible mobile devices allow you to receive notifica-
tions on your activity tracker.
Go to
http://www.bewell-connect.com/wp-content/uploads/2015/12/com-
patible_devices_list.pdf
to see if your device is compatible.
Management of call notification
- To enable or disable notifications, go to the BewellConnect® application
on your smartphone and then click on the BW-MyCoach®Pulse icon.
- In the Settings, click on ”Notifications“ and follow the indications.
Notifications
- When you receive a call, text or a message (social networks), it is
displayed on the screen of your BW-MyCoach®Pulse.
4.4.9. INACTIVITY
- BW-MyCoach®Pulse helps you remain active throughout the day!
Schedule an inactivity alert on your Bewell-
Connect® application. BW-MyCoach®Pulse
starts to vibrate and an icon appears on the
screen when it detects prolonged inactivity.
In the menu, click on ”Alarms“ and follow the
instructions.
4.4.10. CONTROLING THE CAMERA
Remotely trigger the camera located in the BewellConnect® appli-
cation by pressing the button of your BW-MyCoach®Pulse
4.4.11. WRIST SENSE
The screen of your BW-MyCoach®Pulse automatically turns on
when it detects a movement of the wrist similar to the one that you
make to look at a watch dial.
4.5. BATTERY LIFE - RECHARGING
- Your BW-MyCoach®Pulse activity tracker is equipped with a lithi-
um-polymer rechargeable battery, which allows you to monitor
your activity for 5 and 10 days without needing to recharge your
battery, depending on conditions of use.
- Press the button to the left of the screen to display the battery
level.
- The screen displays
in the event of a low battery.
- To recharge your BW-MyCoach®Pulse, connect the USB cable to
your computer or to a power adapter and then connect the other
end to the place provided at the rear of the activity tracker (
See figure
B page 2
).
