Rear Panel
39. IEC AC power socket, insert provided IEC AC power Cable to connect the AC main.
40. POWER SWITCH
–
Use this switch to turn the unit ON/OFF.
41. LINE IN/OUT (B)
–
Input terminal for recording sound source
Output terminal for USB Player at Recorder Section,
42. MIX OUT
–
A mix output to both CD Player and USB/SD Media Player
43. LINE OUT (A)
–
CD Player output terminal.
Troubleshooting
CD LCD indicate NO DISC
Check if the slot in CD reversed
Check if the CD is a traditional CDDA CD or if the music file format is in MP3
Files are being recorded but there is no sound
Check your input devices and connections.
Check the recording level.
Recording level is either too high or low
Re-adjust the recording level.
Check the playback level of your source device.
The sound is distorted
Check the incoming signal from the source device. If this is a mixer, check the outputs and make sure they are
not too high.
Check the recording level.
No audio output from the CSU-100R
Check the output connections on the back of the CSU-100R and connected devices.
Check to make sure the output toggle selector is set correctly.
Files are not recording to SD card/USB drive
Check the SD card or USB device on a computer to ensure it is working correctly.
Ensure that there is sufficient space on the SD card or USB device.
Warranty:
The warranty on Beyond Acoustic products is valid only in the country of
purchase. In the unlikely event of a product fault, please contact your
supplying dealer. Please retain your proof of purchase to obtain warranty
service.
Summary of Contents for CSU-100R
Page 8: ......
