background image

CAUTION: READ THIS BEFORE OPERATING YOUR UNIT 

 

1. 

To ensure the best performance, please read this 

manual carefully. Keep it in a safe place for future 
reference.  

 
2. 

Install your unit in a cool, dry, clean, dust-free 

environment - away from windows and sources of moisture, 
cold, vibration, or devices which may induce hum such as 
transformers or electric motors. To prevent fire or electrical 
shock, do not expose the unit to rain or water. 

 
3. 

Do not operate the unit upside-down. 

 
4. 

Never open the cabinet. If a foreign object drops into the 

unit, contact your dealer. 

 
5. 

Place the unit in a location with adequate air circulation. 

Do not interfere with its proper ventilation; this will cause 
the internal temperature to rise and may result in a failure. 

 
6. 

Do not apply excessive force to switches, knobs or 

cords/cables. Before moving the unit, always turn off the 
power and carefully disconnect the power plug and the 
cords connecting to other equipment. Always hold the plug, 
never pull the cord itself. 
 

7. 

Do not attempt to clean the unit with chemical solvents: 

this might damage the finish. Use only a clean, dry cloth. 
 

8. 

Be sure to read the "Troubleshooting" section on 

common operating errors before concluding that your unit 
is faulty. 

 

9. 

This unit consumes power even when the power switch 

is turned off. We recommend that you unplug the power 
cord from the wall outlet if the unit is not going to be used 
for a long time. This will save electricity and help prevent a 
fire hazard. To disconnect the cord, pull it out by grasping 
the plug, never pull the cord itself. 
 

10. 

To prevent lightning damage, pull out the power cord 

and where applicable, remove the antenna cable during an 
electrical storm.  
 

11. 

Digital signals may cause interference to other 

equipment such as tuners or receivers. The SU-200R 
should be moved away from such equipment if 
interference is observed. 
 

NOTE: 

Please check the copyright laws in your country before 
recording from records, compact discs, radio, etc. 
Recording of copyrighted material may infringe copyright 
laws. 
 

CAUTION 

The apparatus is not disconnected from the AC power 
source so long as it is connected to the wall outlet, even if 
the apparatus itself is turned off. To fully ensure that the 
apparatus is indeed fully void of residual power, leave unit 
disconnected from the AC outlet for at least fifteen 
seconds.  

 

 

 

 
 

 

 

 
 

 

 
 

 

 
 

 

 

 
 

 

 

 
 

 

 
 

 

 

 

Summary of Contents for SU-200R














Reviews: