Getting Connected (cont.)
Connecting directly to a computer or portable audio device:
Using a stereo RCA to 3.5mm audio cable,(sole separately) connect the 3.5mm end to the audio output on your computer or
portable audio device, and connect the RCA ends to the inputs on either side A or B on the SU-200R.
NOTES: If your computer has a different audio output jack, use the appropriate cable. Some computer audio outputs are
labelled with a headphone symbol. NOTE : Be sure to set the audio volume to a sufficient level.
Connecting from side A to side B
Using a stereo RCA to RCA cable, connect one end to audio outputs, (on the side of your choice).
Connect the other end to the other side’s audio input jacks
Recording side A to B
Recording side B to A
Outputs
Connecting individual audio outputs:
You can connect the audio output from each side independently to a mixer (such as a DJ mixer). This allows the SU-200R to
be used as a dual USB/SD player used in conjunction with DJ-style mixers with a Cross-Fader.
1) Using a stereo RCA to RCA cable or two XLR-F to XLR-M cables, connect one end to the audio outputs of side A on the SU-
200R. Connect the other end to available inputs on the mixer.
2) Repeat above with the output from side B.
