Features (cont.)
9. SINGLE button
–
Use this button to enter single playback mode. (see Operations section for
instructions on repeat playback mode)
10. USB/SD button
–
Use this button to toggle between the USB and SD inputs
11. A/B OUTPUT switch
–
Use this switch to toggle side A, side B, and MIXED output to the MAIN OUTPUT jacks
12. +10 button
–
Use this button to advance 10 tracks at a time
13. USB port
–
Insert USB thumb-drive for recording and playback
Front Panel
14. FOLDER button
–
Use this button to toggle through different folders. (See Operations section
for instructions on browsing folders).
15. SD CARD slot
–
Insert SD slot for recording and playback
16. DELETE button
–
Use this button to delete a file. (See Operations section for instructions on
deleting a file)
17. LCD display
–
Displays system information, current operations and settings.
18. VOL
–
Use this control to increase/decrease the volume of connected headphones
19. PHONE
(1/4”) –
Connect headphones to this jack, to monitors the output set by the A/B
output switch.
20. REC LEVEL LEDs - Use these LEDs to monitor and achieve an optimal recording level.
(See operations section for information on setting recording level)
21. SD LED
–
Indicates SD is selected for playback/recording.
22. USB LED
–
Indicates USB is selected for playback/recording.
Rear Panel
23. 24. XLR OUT jacks (balanced) L & R - Connect the audio output from these jacks to the XLR-M jacks on external
mixers, amplifiers, or other devices
25. 26. . RCA OUT jacks (unbalanced) R & L - Connect the audio output from these jacks to RCA audio inputs on
external mixers, amplifiers, or other devices
