7
1. Turn the cold water off by shutting off the cold water faucet.
NOTE:
To help prevent water spray when disconnecting hoses, you can relieve
pressure in the water line by momentarily starting your washing machine.
NOTE:
To ease hose installation and prevent cross threading, connect hose
prior to mounting unit on wall.
NOTE:
Remove the two black caps from the hose connections
before installing hoses.
2. Remove the cold water hose from the cold water inlet on the back of
your washing machine. Leave hot water hose attached.
When connecting hoses to your Laundry Pro 2.0 start by hand tightening the hose
connector(s). Using adjustable pliers, finish tightening hose connector(s). Do not
remove or disconnect the hot water line from your washing machine or water valve.
CAUTION:
1. Return the Laundry Pro 2.0 cover to its original position, fitting the bottom in
place and tipping upward.
2. Secure with two (2) screws (not shown) along the top edge.
3. Put the two (2) remaining screws along the bottom edge and tighten.
REINSTALL THE COVER
HOSE INSTALLATION
Screws
Screws
