3
Operating guide
1. Power Connection
Install the ionizer into the proper position and connect the
power cord. Rotate the on/off, fan speed knob clockwise to
turn on the unit. Continue rotating the knob to achieve the
desired fan speed.
2. Bracket Adjustment
To adjust the angle of operation of the BFN 801 ionizer,
loosen the mounting knobs that secures the bracket and
loosen the left gear completely. Now adjust the unit to the
required angle and re-tighten the knobs.
Note:
Failure to loosen the bracket knobs sufficiently may
result in damage to the bracket mounting system.
3. Periodic Maintenance
The only maintenance required for BFN series ionizers is
the periodic cleaning of the emitter points, inlet and outlet
finger guards and the fan assembly. Emitter point cleaning
affects the static decay ability of the ionizer and is impor-
tant for maintaining its optimal performance.
Emitter point cleaning:
All BFN series ionizing blowers
include an integrated emitter point cleaning brush on the
inlet fan guards. Turn the emitter point cleaners clockwise,
then counter clockwise several times, until points are clean.
When finished, return the point cleaning brush to its resting
position.
Internal fan cleaning:
All BFN series ionizing blowers offer
convenient cleaning of the internal fan assembly. Use the
following procedure to maintain cleanliness.
Note:
Always disconnect the ionizer from the power source
prior to internal cleaning.
