BFT Botticelli VENERE D, Installation And User Manual

USER’S MANUAL

ENGLISH

Thank you for buying this product, our company is sure that you will be more than 

satisfied with the product’s performance. The product is supplied with a “Warn-

ing” leaflet and an “ Instruction booklet ”. These should both be read carefully 

as they provide important information about safety, installation, operation and 

maintenance. This product complies with the recognised technical standards and 

safety regulations. We declare that this product is in conformity with the follow-

ing European Directives: 2004/108/CE, 2006/95/CE, 2006/42/EEC, 99/05/EEC (and 

subsequent amendments).

1)GENERAL OUTLINE

The BOTTICELLI system is compatible with the EElink protocol for fast installa-

tion and maintenance. It is suitable for motorising sectional doors, protruding 

fully retracting spring operated overhead doors and counterweight overhead 

doors provided with an appropriate towing arm. The overhead door must not be 

higher than 3 metres. It is easy to install and fast to fit and does not need the door 

to be modified. The irreversible gearmotor keeps the door locked in the closing 

position. The control unit is builtin. It controls the operation relays and the safety 

devices (photocell, rubber skirt) before performing every manoeuvre.

This product was designed to motorise the types of door mentioned above. 

Any other use is considered contrary to that intended by the manufactur-

er who,therefore,cannot be held responsible for any injuries to persons or 

animals,or damage to things which might derive from misuse.

2)SAFETY

If correctly installed and used, this automation device satisfies the required safety 

level standards. However, it is advisable to observe some practical rules in order to 

avoid accidental problems. Before using the automation device, carefully read the 

operation instructions and keep them for future reference.

•  Keep children, persons and things outside the automation working area, par-

ticularly during operation.

•  Keep radio control or other control devices out of children’s reach, in order to 

avoid any unintentional automation activation.

•  Do not intentionally oppose the leaf movement.

•  Do not attempt to open the door manually, if the internal locking system has not 

been released by pulling the appropriate wire connected to the carriage (fig.1), or 

the external lock (SM1 or SET/S fig.2-fig.3) activated.

•  Do not modify the automation components.

•  In case of malfunction, disconnect the power supply, activate the emergency 

release to gain access to the automation device and request the assistance of a 

qualified technician (installer).

•  Before proceeding to any external cleaning operation, disconnect the mains 

powers supply.

•  Keep the photocell optical components and luminous signal indication devices 

clean. Check that the safety devices (photocells) are not obscured by branches 

or shrubs.

•  For any direct assistance to the automation system, request the assistance of a 

qualified technician (installer).

•  Have qualified personnel check the automation system once a year.

•   Check the installation frequently, in particular cables, springs and supports to 

find out any unbalance, sign of wear or damage. Do not use the operator in the 

case where any repairs or adjustments are required, given that an installation 

malfunction or an incorrectly balanced door could cause injuries. 

•   Once a month, check that the motor reverses when encountering on obstacle 

50 mm away from the floor. Should operation show to be  incorrect, request the 

assistance of a qualified technician, given that an incorrect adjustment could be 

dangerous. 

3) EMERGENCY MANOEUVRE

In case of electric power failure or system malfunction, the manoeuvre must be 

carried out manually by pulling the wire connected to the carriage, as in fig.1. For 

garages which are not provided with a second exit, it is compulsory to fit an exter-

nal key release device like Mod. SM1 (fig.2) or Mod. SET/S (fig.3).

WARNING: If the door is not correctly balanced, activation of the carriage manual 

release could provoke an uncontrolled door movement.

4) BULB REPLACEMENT

To replace the courtesy light bulb, remove its transparent cover (fig.4).

WARNING: Only 24V 25W max E14 bulbs must be used.

E14 24V

25W max

BOTTICELLI VENERE D - 

3

D811493 00100_02