E5 BT A
Please note this is a quick set up guide only and we highly recommend reading the full instruction manual.
*** Never run these motors upside down ***
The new E5 BTA 12 /18 motors are a 24V DC
NON-LOCKING
swinging gate operator. The motors are powered by a
separately mounted Thalia controller and both motors require 5 wires (2 x 1.5mm for the motors and 3 standard
security cables for the limits). The E5 BT A12 is designed for pedestrian gates up to 1.2m and 80kgs (with the unique
“Push & Go” feature)
whereas the E5 BT A18 is designed for vehicle gates up to 1.8m and 100kgs.
MOUNTING GEOMETRY OPTIONS