Changing the password
1.
Press ON button for 5 seconds or wait until the Red LED turn on.
2.
Enter old password then press OK button. The Green LED flashes and Red
LED turn on.
3.
Enter new password then press OK button. Red and Green LED flash on at
the same time.
4.
Re-enter new password. Green light flash on. Password changed!
Memorizing on control unit / receiver
1.
Press ON button for 5 seconds or wait until the Red LED turn on.
2.
Enter the channel number that you will save the new code 4x. (Ch 1: 1111
or Ch 2: 2222 or Ch 3: 3333)
3.
Press ON button again until Red LED flashes.
4.
**For control units with display
**For receivers
5.
Press ON button until Green LED flash 2x.
Deleting a code
1.
Press ON button for 5 seconds or wait until the Red LED turn on.
2.
Enter code to be deleted and press OK button. The Green LED flashes and
Red LED turn on.
3.
Re-enter code to be deleted and press OK button. Code deleted!
